|
|
|
|
Nip
Machine
Nip machine is the most common conventional air duct manufacture
machine. Customer can change the necessary roll as per
requirement. The machine weight is low, easy to move.
|
Shear
Roller Embossing Machine (Ox-head shear)
Shear Roller Embossing Machine is multi-functional machine
with plate shear and sheet rolling, able to shear plate
with thickness below 1.2mm and width under 1.25m, applicable
to thin plate shearing and rolling. It has such advantages
as flexible processing time, easy operation and strong
applicability. It's suitable for on-site processing for
air duct manufacture industry. |
Common
Plate Flange Forming Machine
Common plate flange forming machine is divided into three
models according to work performance: TDF-12, TDF-15 and
double linkage common plate flange forming machine. TDF-12
and TDF-15 are one side station forming its plate-flange
and the other side station forming clamp, while for double
linkage machine, both sides' stations forming at the same
time. The formed flange has high quality, and the efficiency
is high. |
Common
Plate Flange Folding Machine
This machine can directly execute bending process on plate
with flange already made, to realize three folds of plate.
It's a practical and essential machine during the process
of common-plate flange air duct. Meanwhile, it can also
be used as common folding machine. |
|
|
|
|
|
|
|
|
Steel-strip
Spiral-seam Tube Former
Able to process spiral ducts of various diameters within
a given diameter range, without using pipe die, but replacing
the pipe die with steel pipes with different lengths by
suitable installation and adjustment. According to the
length needed for use, cutting can be made using high-speed
synchronous automatic cutting system.
|
Pneumatic
Linking Machine
Horizontal type of linking machine is ideal equipment
for linking ofconnection corner (oriental bone) and straight
flange, significantly improving production efficiency
of air duct linking, and the linking is tight and flat,
without injuring the metal surface.
|
CNC
Angle Steel Flange Production Line
CNC Angle Steel Flange Production Line mainly consist
of hydraulic shearing machine, hydraulic piercing machine,
angle steel feeding and discharge mechanism, PLC controller
and a set of software.
|
Indices
Binding Machine
Automatically bind the indices at one time, to save installation
manpower and improve installation efficiency.
|
|
|
|
|
|
|
|
|
Wire
Rolling Machine
There are manual and power-driven wire rolling machines,
with main function of embossing connection of produced
round pipe, and transforming it into different shape through
special rolling. |
Horizontal
Type of Small Shrimp Bending Machine
Horizontal Type of Small Shrimp Bending Machine is also
called round pipe elbow nip machine, a special machine
for processing the joint nip on metal thin plate round
pipe and round pipe elbow (small shrimp head). The range
of pipe diameter is 100-1000mm, with minimum diameter
100mm. It has good sealing and good-looking appearance.
Small shrimp bender is mainly used in elbow of air conditioner
hearing and ventilation.
|
Angle
Steel Round Rolling Machine
This machine can roll angle steel into round shape, with
high efficiency and easy operation and movement. It's
an indispensable machine in air duct production. After
customizing special dies based on different requirements,
it can also roll other sectional materials.
|
Electric
Hydraulic Riveting Machine
This is one of the indispensable machines for ventilation
installation project construction, applicable to riveting
work of ventilation pipe linkage flanges, with features
like high production efficiency, fast and convenient,
small size of equipment, flexible operation, low noise
and convenient maintenance.
|